Fire Doors, Fire Rated Screens & Intumescent Products
Fire resisting doors are an integral part of the building's fabric. When fitted correctly they can not only preserve part of the building should a fire break out, but also save lives, by stopping the spread of fire and smoke.
It is the absolute duty of the responsible person for that building to maintain, repair, replace and have the buildings fire doors inspected every 6 months, and to the criteria required by the current fire door regulations and fire escape regulations.
Overlooking this incredibly important aspect of managing the premises could result in serious consequences for the responsible person whose job is to oversee the project management and maintenance of the premises, for the business/building owner, not to mention the occupants of the building.
Have your fire doors inspected on time. Be safe, be compliant!
The hardware to be used on fire doors must be fitted in accordance with the current EN regulations for that specific hardware, and in addition, must be fire tested, Certifire approved and CE Marked.
How Our Experienced Fire Door Fitters Can Help
We supply and install wooden fire doors in most finishes including formica, laminated, spray booth finish, plywood faced and hand painted finishes in any RAL or British Standard colour.
Formica and laminated finished timber fire doors are also available in many effects, such as wood grain, metallic, mirror and a range of colourful designs.
We also install steel fire resisting doors in a range of colours, finishes and veneers, which offer the building greater fire resistance and security.
Get your fire doors assessed and if required, updated!
Be safe, be compliant!
We are here to assist you.
Fixed fire rated screens
A fire screen is used to allow visibility, light and create a secure area whilst having no doorway for access. The screen is acting as a partition and may fully fully or part glazed.
The partitioning screen (in most cases) will have to be fire resisting due to it's location within the building.
We install fire screens with required fire rating to many buildings, purpose made by our joinery manufacturer.
The glass type for our partition fire rated screens can be selected from our extensive glazing brochure. There is a vast range to choose from, to suit your requirements, and fire rated, too.
The intumescent products we install on site are
Hinge pads, wraps and jackets to door hardware products.
Intumescent strips of many variations, applicable to the fire rating of the door set.
Door edge guards.
Vent and grille blocks.
The ratings of fire doors and screens we install are as follows:
NFR Non Fire Rated
FD30 Offering fire resistance for 30 minutes
FD60 Offering fire resistance for 60 minutes
FD90 Offering fire resistance for 90 minutes
FD120 Offering fire resistance for 120 minutes
Our joinery & fire rated glass manufacturers:
All of our fire resisting doors, glass, screens, access panels and hatches are made by our trusted manufacturers who always produce quality joinery and are an accredited member of the Q Mark Fire Door Manufacturing Scheme.
Ironmongery & Intumescent products:
The ironmongery which we use on all of our contracts is supplied by Krowl Architectural Ironmongery Ltd.
We use only the most trusted of CE marked door hardware and associated fittings, which have undergone the necessary Certifire and BSEN testing to meet the required standards.